Energy UNITS FOR LIFT TABLE one
Basic Description
This power unit is intended solely for the compact lift table,Consisting of high stress gear pump, AC motor, multi-functional manifold, valves, tank, and so forth. This electrical power unit has become widely utilised inside the industry of logistic devices for instance minifork lift, scissors lift and ariel doing work platforms. The lower-ing movement is controlled by the solenoid valve together with the velocity managed from the adjustable needle valve.
Electrical power UNITS FOR LIFT TABLE 2
Basic Description
This electrical power unit is designed solely to the medium lift table, Consisting of really effecient gear pump, AC motor, multifunctional manifold, valves, tank, ect. The reducing motion is actived from the solenoid valve and the pace controlled by the adjustable needle valve. Once the lift rises to a large positoin, however the electrical power provide is minimize, the lowering motion is managed from the manual override function.
Power UNITS FOR LIFT TABLE 3
Standard Description
This energy unit is built exclusively for that significant lift table, Consisting of remarkably effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The decreasing motion is actived through the solenoid valve as well as speed controlled by a pressure compensated flow manage valve.
Energy UNITS FOR LIFT TABLE four
Standard Description
This power unit is developed exclusively for that massive lift table, Consisting of highly effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The reducing movement is actived by the solenoid valve along with the velocity controlled by the adjustable needle valve. Once the lift rises to a high positoin, but the electrical power supply is minimize, the reducing motion is controlled through the guide override perform.
Distinctive Notes
1. This electrical power unit is of S3 duty cycle, which may only do the job intermittently and repeatedly, i.e. one minute on and 9 minutes off.
2. Clean all the hydraulic parts concerned prior to installation of the electrical power unit.
3. Viscosity in the oil shoud be 15~46 cst,which should also be clean and free of impurities.N46 hydraulic oil is encouraged.
four. Oil changing is required immediately after the initial one hundred operation hrs,afterwards after just about every 3000 hours.
5. The power unit proven is made to be mounted vertically.