DC MOTOR PUMP GROUP 1
Common Description
Consisting of a heavy duty DC motor and the CB1S gear pump, this pump motor group is definitely an best hydraulic electrical power unit for mobile hydraulic equipments, such as car or truck carriers, mobile aerial lifts, and backup programs.
DC MOTOR PUMP GROUP two
Standard Description
This motor pump consists of 4.5″ DC motor, a CBSR gear pump with built-in relief valve and check out valve.
DC MOTOR PUMP GROUP three
Standard Description
This motor pump consists of a 4.5″ DC motor plus a CBSR gear pump which has a standard energy up/gravity down circuit which has a relief valve, a check valve in addition to a solenoid release valve.
Specific Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all of the hydraulic parts concerned prior to mounting the electrical power unit.
3. Viscosity of the hydraulic oil shoud be 15~68 cst, which must also be clean and free of charge of impurities. N46 hydraulic oil is advisable.
4. The electrical power unit needs to be mounted horizontally.
five. The relief valve strain is preset about 25% larger than the working stress.
6. Flow handle valve for lowing velocity adjustment is accessible unpon request.