Materials Managing Energy UNIT two
This electrical power unit features power up gravity down circuit. Activate the get started solenoid to begin the motor to lift the machine. The lowing motion is activated from the solenoid valve using the lowering velocity controlled by the strain compensated flow manage valve. Products of this series can be broadly utilized in the industry of logistic units for instance fork lift, mini lift table, etc.
1. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean all the hydraulic parts concerned in advance of mounting the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which should also be clean and cost-free of impurities, N46 hydraulic oil is encouraged .
four. Oil transforming is needed following the first one hundred operation hrs,afterwards once just about every 3000 hours.
five. The power unit must be mounted horizontally.
Materials Managing Energy UNIT 1
This energy unit is created for your fork lift industry, consisting of highly efficient gear pump, DC motor, guide increase and decrease valve, tank, ect. The up and down movement are controlled from the lever from the guide release valve, which is outfitted with an electrical switch to activate the motor. The lowing speed is controlled through the pressure compensated flow handle valve.
1. The duty of this energy unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean each of the hydraulic parts concerned in advance of installation of the power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which ought to also be clean and absolutely free of impurities, N46 hydraulic oil is suggested .
4. Oil altering is needed soon after the initial one hundred operation hrs, afterwards after every single 3000 hrs.
5. The energy unit proven is intended to be mounted horizontally.