Basic Description
Consisting of a strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is created to operate materials managing tools. The reducing movement is achived by the solenoid valve with all the lowering speed managed by an adjustable needle valve. The left and correct functions are outfitted having a dual pilot operated verify valve and cross-over relief valves.
Remark: Please talk to our product sales engineer to the distinct pump displacement, motor electrical power or tank capability.
Unique Notes
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean all of the hydraulic elements concerned ahead of installation of the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which must also be clean and no cost of impurities.N46 hydraulic oil is suggested.
four. This power unit needs to be mounted horizontal.
5. Check the oil level from the tank just after the 1st start out of your energy unit.
six. Oil shifting is required right after the preliminary a hundred operation hrs, afterwards the moment every single 3000 hours.