Downsizing Your Program 
with Larger Energy Chains
HK style roller chains conform to H kind of ANSI, and their thickness of inner and outer hyperlink plates are equal to individuals with the following larger size chain. Hence, HK kind roller chains are larger in tensile strength by about 20%and in optimum allowable load by about 15% than people of standard roller chains. Since the weight of the chains can be greater, HK style roller chains are appropriate to the application of hefty duty at very low speed.
Recommended employs
?Optimal for spots in which greater power is needed but huge and heavier chains are unable to be used.
Choice of chains
Choose a good HK type roller chain dependant on “Low-speed selection”
To the maximum allowable load, see the next table of dimensions.
HK variety roller chains are available as much as triplex.
Sprockets
Use standard sprockets for any simplex HK roller chain Because the transverse pitches are bigger than people of standard chains during the case of duplex or triplex, regular sprockets are not able to be used. Refer on the sprocket tooth profiles for HK
Connecting hyperlink and offset hyperlink
The tensile power of connecting back links and offset links are listed about the left, but the highest allowable load is lower than that of your base chain. Please seek advice from us need to you’ve any queries. It truly is encouraged to work with the connecting link of interference-fitted (FJ, HJ)
In no way make the holes in the connecting plate bigger and in no way make the pins thinner to facilitate the do the job for fitting the pins into the connecting plate, because otherwise the fatigue power will be lowered.
Selection of chains
Choose a appropriate HK sort roller chain according to “Low-speed selection”
For that maximum allowable load, see the next table of dimensions.
HK variety roller chains are available up to triplex.
Sprockets
Use typical sprockets for a simplex HK roller chain Since the transverse pitches are greater than individuals of regular chains inside the situation of duplex or triplex, conventional sprockets can not be utilised. Refer to your sprocket tooth profiles for HK
Connecting hyperlink and offset website link
The tensile strength of connecting back links and offset links are listed to the left, but the optimum allowable load is reduce than that on the base chain. Please seek the advice of us really should you’ve got any inquiries. It can be encouraged to implement the connecting link of interference-fitted (FJ, HJ)
Never ever make the holes with the connecting plate greater and hardly ever make the pins thinner to facilitate the perform for fitting the pins into the connecting plate, due to the fact otherwise the fatigue power will likely be lowered.
