We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/
Salient Feature:
★The bearing of grinding wheel spindle is five plates dynamic sliding bearing, with high carrying capacity and rigidity.
★The bearing of regulating wheel spindle is 1:30 cones integral sliding bearing with high carrying capacity and precision.
★The feeding system equipped servo motor with high precision planetary gear reducer, feeding through coupling driving ballscrew.
★The grinding wheel dresser droved by servo motor and ball screw, dressing any steps without any gauge finder.
★AC frequency converter is used for regulating wheel speed control .
★Hydraulic transmission & stepless speed regulation are adopted on regulating wheel dresser.
★The machine operated by 10′ touch screen, auto plunge feeding, load, speed, time and steps can be adjusted.
★Equipped Mitsubishi EPT system.
Main Application:
The grinder is mainly used for through-feed grinding for cylindrical surface of ring-type and bearing parts, as well as for manual plunge-cut grinding of
various stepped, cones cylindrical screw surfaces.
Technical data:
| Thru-feed | |
| 1)Grinding diameter | 5-50mm |
| 2)Grinding length | 120mm |
| Plunge feed | |
| 1)Grinding diameter | 7-50mm |
| 2)Grinding length | 120mm |
| Grinding wheel specifications | P400*150*203mm |
| Regulating wheel specifications | PSA300*150*127mm |
| Grinding wheel speed | 1668r/min |
| Regulating wheel speed(stepless) | 20-200r/min |
| Swiveling angle of regulating wheel | |
| 1)In vertical plane | -2°~ 5° |
| 2)In horizontal plane | 0°~ 3° |
| Feed amount per division of the feed handwheel | 0.001mm |
| Feed amount per division of the dresser | 0.01mm |
| Height from centerline of gri.wheel & reg.wheel to workrest | 220mm |
| Total power of machine | 13.78kw |
| 1)Grinding wheel motor | 11kw |
| 2)Regulating wheel motor | 1.5kw |
| Overall dimensions | 1920*1681*1479mm |
| Machine weight | about 2800kg |
| Machining accuracy | |
| 1)Roundness | 0.002mm |
| 2)Cylindricity | 0.003mm |
| 3)Surface Roughness | Ra0.32um |
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.
/
